Galaxy’s Pouching Machine Model: GS 24 PLUS 200 is a high speed automatic Stand Up Zipper Pouch making machine. The machine takes into account the production speeds, sealing consistency, quality, pulling speeds and sealing intensity to produce beautifully sealed and secured pouches even at higher speeds.
With the amazing servo controlled seal time and wait time functionality the operators can setup the machine in short time. The machine has recipe feature to save all the setup data into the system which can be fetched by operators anytime making it very operator friendly and easy to setup line.
From automated cutting and sealing to adjustable speed control, this machine provides a variety of features that can help businesses save time and money while producing top-notch pouches. This will give you an edge over your competitors and will make you stand out at the top in the market.
Model GS 24 PLUS 200 is fully packed to produce pouches from Plant Based Compostable Films, Plastic Free Food Grade Lacquer Coated Paper and Fully Recyclable Same Family Films suitable for Pouching.
One Up to Four Up Production :
100 mm to 600mm {W} x 100mm to 400mm {L} X Multi Skip System.
One Up Production :
150 mm to 600mm {Height} x 80mm to 400mm {Width} x 60mm to 200mm {Open Gusset} Max.
Double Up Production :
100 mm to 300mm {Height} x 80mm to 400mm {Width}x 60mm to 200mm {Open Gusset} Max.
One Up Production :
600mm {Width} X 400mm {Length} X 200mm Gusset X Multi Skip System.
One Up Production :
500mm {Width} X 400mm {Length} X 100mm Open Gusset X Multi Skip System.
One Up Production :
150 mm to 570mm {Height} x 80mm to 260mm {Width} x 60mm to 200mm {Open Gusset} Max.
Double Up Production :
100 mm to 285mm {Height} x 80mm to 260mm {Width}x 60mm to 200mm {Open Gusset} Max.
One Up Production :
400mm {Width} X 400mm {Height} X Multi Skip System.
* Primary Unwinding Unit (1200 mm) Horizontal With Auto Tension Control System and Line guide (E+L German Make).
* Secondary Horizontal Unwinding Unit with Auto Tension System by E+L Germany and Front -Back Film Synchronization (with 1 no. Servo & controller).
* Side Gusset Unwinding Unit with Auto Tension (E+L German Make) and Both Side Synchronization (2 no. Servos & Controller).
* Auto Punch Correction Unit by Servo Controlled System.
* Quad Seal Pouch Making Unit with Double Up Stand Up Pouch Making Functionality from Same Roll.
* Longitudinal Zipper Sealing Station With Two Heads.
* Longitudinal Sealing Station with Three Heads and Servo Control System.
* Seven Cross Stations with Skip System.
* Ultrasonic Bit Fusing Station with Branson USA make Ultrasonic Units.
* Trim Winder.
* Dual Cutting Servo Controlled Assembly.
* Two Rolls Zipper Unwinder with Two Ups entry guides.
* Total 16Nos. of Servos by B&R Austria.
* Programmable Logic Control Module by B&R Austria.
* Display automation panel 15.05″XGA TFT 1024 X768 Pixel, Single Touch.
* Temperature Controllers PLC Module.
* All Pneumatic from SMC and Festo.
* Four Servo with Planetary Gear Box & controller.
* Three Stations with servo controlled fine adjustment in microns.
* All kinds of Punches.
* Online Vision System for Cutter Control.
* Online QC System.
* Vacuum Suction Units for Punch Waste Collection.
* Micro Perforation Unit.
* Coreless Trim Winder.
* Air Flash System.
* Double Cut Trim Suction Unit.
The unique selling points of our pouching machines are maximum performance (even in harsh conditions), user friendly interface, reliability and above all cost effectiveness. Our machines comply with international standards and can be customized depending on the customer’s requirements; meeting both simple as well as complex needs.
The maximum web width for main unwinder and bottom gusset unwinders are 1200mm and 200mm respectively. The main unwinder and side unwinders comes equipped with Auto Tension and Line Guide System by E+L Germany.
The bottom punches for Stand Up pouches are controlled by Smart Servo System which makes automatic correction in the running condition. This feature is very useful and helps in reducing the wastage exponentially.
In total there are Seven Cross Stations:
Machine also has provision for additional one extra Cross Ultrasonic Bit Station which utilises Branson USA made Ultrasonic Units.
All the Cross Stations comes equipped with Skip feature.
With Galaxy’s original Air Tight Sealing technology, this model is feature packed to make Retort and Liquid Pouches.
Machine comes equipped with Seal Time Control feature using which the operators can increase or decrease the production speeds without having any impact on sealing quality. Because of such feature the machine has very low setup wastage and setup time.
The machine is able to run four webs in registration. Even the front and back of the pouch can be from separate webs.
Machine has two types of Longitudinal Stations in it. First one is Zipper Sealing & Cooling Station with Two Heads which has 640mm Sealing and 400mm Cooling. The second one is Stand Up Sealing Station with Three Heads which has 640mm Sealing and 500mm Cooling.
Our Shape Cut technology is class apart and generations ahead.
Equipped with servo control precision system, the cutting pressure of shape cut unit can be increased or decreased in microns from machine main screen via a simple touch.
This ensures you get maximum output from your shape cutting wooden die and reduces the setup wastage exponentially.
Model GS 24 PLUS 200 is fully packed to produce pouches from Plant Based Compostable Films, Plastic Free Food Grade Lacquer Coated Paper and Fully Recyclable Same Family Films suitable for Pouching. To know more about it, kindly drop us an email at marketing@galaxypacktech.com
Automatic Spout Fixing Machine
Automatic Centre Seal, Quad Seal and Three Side Seal Pouching Machine